Email:yonghong012@yhaluminum.com Hangzhou Yonghong Aluminum Industry Co.,Ltd

Hangzhou Yonghong Aluminum Industry Co.,Ltd

Product Categories
Contact Us

Hangzhou Yonghong Aluminum Industry Co.,Ltd

Tel:+86 571 8822 2633

Mobile:+86 157 5712 8594

Fax:+86 571 8822 2577

Email:yonghong012@yhaluminum.com

6061-o Aluminum Sheet

6061-o Aluminum Sheet

1100 h14 aluminum sheet builing decoration usage Description: -Thickness (MM):0.2~500mm -Width (MM):200~3000mm -Length (MM): ≤12000 -Application: Airplane/Boat/Automobile parts, Oil Tank, Pipe; Construction, Electrical cabinet, Parts; Hardwares, Electric Appliance, etc. -Packing: Wooden pallet...

Chat Now
Product Details

6061-o aluminum sheet

6061 is a precipitation-hardened aluminum alloy, containing magnesium and silicon as its major alloying elements. Originally called "Alloy 61S", it was developed in 1935.[2] It has good mechanical properties, exhibits good weldability, and is very commonly extruded (second in popularity only to 6063).It is one of the most common alloys of aluminum for general-purpose use.

6061

Annealed 6061 (6061-O temper) has maximum tensile strength no more than 310 MPa (45,000 psi), and maximum yield strength no more than 55 MPa (8,000 psi). The material has elongation (stretch before ultimate failure) of 25–30%.

6061-T4

T4 temper 6061 has an ultimate tensile strength of at least 210 MPa (30,000 psi) and yield strength of at least 110 MPa (16,000 psi). It has elongation of 16%.

6061-T6

T6 temper 6061 has an ultimate tensile strength of at least 290 MPa (42,000 psi) and yield strength of at least 240 MPa (35,000 psi). More typical values are 310 MPa (45 ksi) and 270 MPa (39 ksi), respectively.In thicknesses of 6.35 mm (0.250 in) or less, it has elongation of 8% or more; in thicker sections, it has elongation of 10%. T651 temper has similar mechanical properties. The typical value for thermal conductivity for 6061-T6 at 25 °C (77 °F) is around 152 W/m K. A material data sheet defines the fatigue limit under cyclic load as 97 MPa (14,000 psi) for 500,000,000 completely reversed cycles using a standard RR Moore test machine and specimen. Note that aluminum does not exhibit a well defined "knee" on its S-n graph, so there is some debate as to how many cycles equates to "infinite life". Also note the actual value of fatigue limit for an application can be dramatically affected by the conventional de-rating factors of loading, gradient, and surface finish.


6061 is commonly used for the following:

construction of aircraft structures, such as wings and fuselages, more commonly in homebuilt aircraft than commercial or military aircraft.[8] 2024 alloy is somewhat stronger, but 6061 is more easily worked and remains resistant to corrosion even when the surface is abraded, which is not the case for 2024, which is usually used with a thin Alclad coating for corrosion resistance.

yacht construction, including small utility boats.

automotive parts, such as the chassis of the Audi A8.

some tactical flashlights

aluminum cans for the packaging of food and beverages.


6061-T6 is used for:

Many aluminum docks and gangways are constructed with 6061-T6 extrusions, and welded into place.

Material used in some ultra-high vacuum (UHV) chambers

Many parts for remote controlled model aircraft, notably helicopter rotor components.

6061-o aluminum sheet

Welding

6061 is highly weldable, for example using tungsten inert gas welding (TIG) or metal inert gas welding (MIG). Typically, after welding, the properties near the weld are those of 6061-O, a loss of strength of around 80%. The material can be re-heat-treated to restore -T4 or -T6 temper for the whole piece. After welding, the material can naturally age and restore some of its strength as well. Nevertheless, the Alcoa Structural Handbook recommends the design strength of the material adjacent to the weld to be taken as 76 MPa (11,000 psi) without proper heat treatment after the weld.[citation needed] Typical filler material is 4043 or 5356(used only for non heat treatable aluminum such as 5052).

Extrusions

6061 is an alloy used in the production of extrusions—long constant–cross-section structural shapes produced by pushing metal through a shaped die.

Forgings

6061 is an alloy that is suitable for hot forging. The billet is heated through an induction furnace and forged using a closed die process. This particular alloy is suitable for open die forgings. Automotive parts, ATV parts, and industrial parts are just some of the uses as a forging. Aluminum 6061 can be forged into flat or round bars, rings, blocks, discs and blanks, hollows, and spindles. 6061 can be forged into special and custom shapes

6061-o aluminum sheet

6061-o aluminum sheet

Hot Tags: 6061-o aluminum sheet, China, manufacturers, suppliers, factory, exporter, from China
Related Products
Copyright © Hangzhou Yonghong Aluminum Industry Co.,Ltd. All Rights Reserved.
QR Code